Are you in search of a high-performance workplace display or a second management display to position vertically? Look no additional: the Huawei MateView SE will meet your expectations.

Selecting among the many entry-level fashions on PC screens will not be a straightforward activity. That is maybe the class wherein it’s the most troublesome to kind out, as there are nonetheless getting old references that abound in the course of the true bargains. However the place does the Huawei MateView SE slot in all this? That is what we’re going to attempt to decide.
Huawei MateView SE (2022)Technical sheet
Mannequin | Huawei MateView SE (2022) |
---|---|
Expertise |
LCD |
Curved display |
Nope |
display measurement |
23.8 inches |
Type issue |
16:9 |
Definition |
1920 x 1080 pixels |
Show frequency |
75Hz |
Adaptive Sync Expertise |
AMD FreeSync |
Most brightness |
250 cd/m² |
HDMI ports |
1 |
DisplayPort connector |
1 |
Audio system |
Nope |
Weight |
4.5 kilograms |
Dimensions |
47.2 x 53.85 x 18.2cm |
Value |
185 € |
Product sheet See the check |
This check was carried out with a mannequin loaned by Huawei.
Huawei MateView SE (2022)Design
On the design aspect, the Huawei MateView SE doesn’t significantly stand out. Each within the good and within the unhealthy. When most entry-level screens pay little consideration to element, the producer has chosen right here to attract inspiration from good examples to supply a display that doesn’t low-cost, with out after all equaling the prime quality. For instance, there’s a pretty slim body on the edges of the slab, which permits the latter to occupy 92% of the entrance floor.

Its sq. base is harking back to many references comparable to these of Iiyama, besides that the display doesn’t have a horizontal pivot. The very tubular design of the foot remembers the references of LG (or Mike Oldfield, as desired). The entire thing is definitely made from plastic, however the latter will not be of poor high quality and doesn’t sound hole. This provides the MateView SE an impression of solidity and high quality, for a mat look that might be excellent on any desk.

Huawei MateView SE (2022)Ergonomics
Out of this lack of horizontal pivot, we should acknowledge the Huawei MateView SE (CBA model) a sure flexibility which isn’t essentially assured in its class. The display might be adjusted in peak (from 0 to 110mm) and in inclination (from -15 to 18 levels). However it may possibly above all be turned vertically, though it will naturally require elevating it to the utmost and taking part in with its inclination a bit in order that every little thing goes by way of.
Its foot clips in two factors and might be eliminated very simply. It’s also possible to discover on the again of the display, when the foot will not be mounted, 4 VESA mounting factors in 100×100 if you wish to combine it right into a extra modular configuration. To entry the OSD, you simply need to play with the 5-way joystick positioned on the backside heart of the display, which is practical with out being a terrific revolution.
Contemplating the opposite references, few entry-level screens present so many choices, and all in such a visually neat bundle. An actual success for the Huawei MateView SE.
Huawei MateView SE (2022)Connectivity and OSD
Entry degree obliges, we’re in entrance of a PC display which doesn’t search to do greater than that: to be a display in your PC. Additionally, it solely presents three connectors: the 24W energy port, in a basic barrel format, an HDMI 1.4 port whose cable is provided by default and a DisplayPort 1.1.

Supply: Chloé Pertuis – Frandroid

Supply: Chloé Pertuis – Frandroid
As for the OSD, we’re as soon as once more on one thing very fundamental. The interface offered by Huawei is just like some other, with panels opening from left to proper on which to pick out its choices. You’ve the proper between a number of default show modes, an anti blue mild filter, the activation of FreeSync or the creation of a personalised profile.

Supply: Chloé Pertuis – Frandroid

Supply: Chloé Pertuis – Frandroid
It’s on this final level that there’s a small disappointment. If the administration of the degrees of purple, blue and inexperienced is current, this isn’t the case for the number of the gamma which may nonetheless be important to seek out one of the best settings.
Huawei MateView SE (2022)Our measures
The Huawei MateView SE has a 23.8-inch IPS LCD panel supporting a most definition of 1920 × 1080 pixels and a most refresh charge of 75 Hz (60 Hz by default). It’s protected by a matte coating. Along with the “eBook” mode, which switches the display to black and white to counter eye fatigue, you might be entitled to 4 default calibrations. Observe that for all these configurations, the utmost brightness is at all times raised to round 220 cd / m², which is low even indoors. The producer additionally signifies a most distinction of 1000:1, however our checks underneath DisplayCal have been carried out with out touching the default configuration of every mode.
The P3 mode is probably the one which disconcerted us essentially the most when leaving the field. Default mode of the display, which presents a distinction ratio of 250:1 right here, it’s nonetheless not the one which shows one of the best protection of the DCI P3 house, which stays at 83.5%. sRGB is roofed at 117.8%, and Adobe RGB at 81.2%. Its common coloration temperature is raised to 6137K, for a mean Delta E00 of 1.4 (6.37 on the white level). This mode subsequently has essentially the most correct colours on common, however will not be essentially essentially the most environment friendly.
The sRGB mode can also be considerably unusual, because it solely covers 87.3% of the sRGB house in comparison with 61.9% of the DCI P3 and 60.2% of the Adobe RGB. It is particularly the distinction ratio that drops terribly, falling to simply 139:1. We discover not less than a mean Delta E00 of 0.77 (4.15 on the white level), even when that is counterbalanced by a extremely popular common temperature of 6017K.
The sport mode is on the verge of being essentially the most attention-grabbing of the lot. It covers 123.5% of sRGB house, 87.5% of DCI P3 house and 85.1% of Adobe RGB house. It additionally boasts a greater distinction ratio at 271:1, however sports activities a really chilly coloration temperature of 7020k. Above all, its common Delta E00 at 3.3 makes it a pleasant hole on the earlier modes. Nevertheless, it has the identical traits as the opposite sport modes on this installment: it largely seeks to brighten darkish areas of the picture to make it simpler to see an enemy. It’s subsequently not significantly appropriate for different makes use of.
However thankfully, there may be the final mode of the display which isn’t unusually activated by default: the HDR mode. This one is visually effectively above the remainder, and stays because the one providing one of the best visible expertise, past empirical measurements. It covers 127.1% of the sRGB house, 87.6% of the Adobe RGB house, and the well-known 90% filled with the DCI P3 house promised by Huawei. And if its Delta E00 measured at 2.02 (6.49 on the white level) will not be one of the best of all, because the display suffers significantly on the show of greens, it’s nonetheless the popular mode in entrance of all of the others. It’s apparent having the display in entrance of you.
Observe that the Huawei MateView SE is FreeSync appropriate and permits you in every of those modes to spice up the latency of the panel to succeed in 5ms, which is comparatively respectable for this worth bracket. Nevertheless, a barely inexpensive mannequin of the identical display has 8ms latency: watch out to not get the reference fallacious!
Huawei MateView SE (2022)Value and launch date
The Huawei MateView SE might be launched in the course of the month of August. It will likely be obtainable in the usual model (CAA), with out swivel assist and at 8ms latency, for 159.99 euros, and at 169.99 euros for the low latency CBA model (5ms) with swivel assist just like the one in our check.